Quick Setup Guide

Starlink Mini Kit

Reliable satellite internet for your next adventure

You need your own power

The dish draws 20-40W when running, and needs to be powered via a standard AC outlet or 12V car outlet. A portable power station or a vehicle inverter will run it; a USB power bank will not.

In this box

  • Cables & Accessories · Charging plugs (AC and 12V) and cables (x2)
  • Car Mount
  • Collapsable Tripod · Tripod, Tripod mount (with hex key and screw)
  • LimeLoop returnable bag (Large)
  • Starlink Mini · Starlink Mini Dish, Kickstand
  • Starlink Mini backpack

Add at checkout

  • Portable Power Station (1024Wh) $40/day
  • Portable Power Station (300Wh) $15/day
  • Solar Panel (220W)· requires Portable Power Station (1024Wh) $20/day
  • Solar Panel (45W)· requires Portable Power Station (300Wh) $5/day

Set up the dish

  1. Attach the power cable to the dish (use the AC brick + cable). Don't plug into power yet.
  2. Find a clear view of the sky. Avoid overhead trees, buildings, and obstructions, and aim for a ~100° cone of open sky.

Get it up off the ground

  1. Mount the dish on the tripod. Use the tripod with its mount whenever you can: keeping the dish up off the ground keeps it visible, so nobody trips over it or drives over it.
  2. The kickstand bracket is included for a quick low-profile setup: either way, feed the power cable through the mount.

Stand it on the kickstand

  1. Fold the kickstand out from the back of the dish until it clicks.
  2. Set it on any flat surface with a clear view of the sky. Quickest option, and the one to use if you are only stopping briefly.
  3. It sits low, so keep it off the ground where someone could step on it.

Mount on the vehicle

  1. Attach the mounting frame to the StarLink and use the suction or magnets to mount to your sunroof.
  2. If mounting on the outside of your car, run the power cable in through a door or window seal, not the tailgate.

Wake the dish

  1. Plug in your power source.
  2. A blue light on the back of the dish means it's getting power. Give it 1 to 2 minutes to wake up.
Starlink Mini Kit · side 2

No app, nothing to prep

There's nothing to install or set up before your trip: no Starlink app, no downloads. Once you connect, the sign-in page at portal.wifiwithoutwalls.com gives you every tool you need: get online, watch your data, and diagnose obstructions or connection issues, right there.

Connect the system

Join network WiFiWithoutWalls
No password needed: open network
  1. Join WiFiWithoutWalls in your device's WiFi settings.
  2. The sign-in page opens automatically. Didn't open? Scan the code, or open a browser to portal.wifiwithoutwalls.com.
  3. Enter the last 4 digits of the phone number on your reservation and you're online.

Every device connects the same way: join the network, enter the 4-digit code. Share it with your group.

Scan to open
portal.wifiwithoutwalls.com

Pack down

  • Coil the cables and put them back in the outside zipper pocket of the backpack along with the charging plugs.
  • The Starlink Dish goes in the front square zipper pocket of the backpack.
  • Everything else goes in the main backpack pocket: tripod, tripod mount, kickstand, and car mount.
  • The prepaid return label is on the back of the outbound label. Once you put the backpack back in the shipping back, flip the label and drop off at a FedEx location or drop box.

Troubleshooting

Connected, but no internet?
  • Open the sign-in page's sky view to check for obstructions.
  • Reposition the dish for clearer sky.
  • Confirm the blue light on the back is lit, and check both ends of the power cable.
Network not showing up?
  • Wait 1 to 2 minutes, then power-cycle the dish.
  • Still nothing? Text us, we can see the dish from here.